Water Pumps & Tanks
100 LB, Pressure Gauge, 1/4" Bottom Mount In A Stainless Steel Case With Glass Front.
100 LB, Backmount Gauge, 1/8" Backmount In A Stainless Steel Case With Glass Front.
200 LB, Pressure Gauge, 1/4" Bottom Mount In A Stainless Steel Case With Glass Front.
Master Plumber, Professional Series, 3/4 HP, Cast Iron, Submersible Sump Pump, With PSC Motor Technology For Energy Efficiency, 115V AC Single Phase Motor, Rugged Cast Iron Construction For Longer Pump Life, Rust Proof Impellers, Reliable, Professional Design, Superior Performance, Proven Technology, Piggyback Style Vertical Float Switch For Automatic Or Manual Operation, Performance GPH 0' = 5280, 5' = 4800,10' = 4020, 15' = 3180, 20' = 1800, Maximum Lift 25', 10' Power Cord, 1-1/4" FNPT Discharge, Fits In 10" Or Larger Sump Basin, 3 Year Limited Warranty.
Master Plumber, 1/2 HP, Cast Iron, Submersible Sump Pump, 115V, 1 Phase, Performance: GPH 5' = 3,780, 10' = 3,120, 15' = 2,820, 20' = 2,280, 25' = 1,800, 30' = 600, Maximum Lift 33', 1-1/2" Discharge, Fits In A Sump Diameters Of 10" Or More, 1-1/2" Discharge, 10' Power Cord, Reliable Capacitor Free Design With Shaded Pole Motor, Heat Sensor Overload Protection With Automatic Reset When Motor Cools To Safe Operating Temperature, Intake Screen Volute Base, Switch & Power Cord Are Serviceable, 3 Year Warranty.
1 HP, Cast Iron/Stainless Steel, Submersible Sump Pump, With Vertical Switch, Designed For 11" Diameter Or Larger Sump Basin, Pumps Up To 4600 GPH @ 0', Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Motor Housing & Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1 HP, Motor, 1-1/2" NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups, 5 Year Warranty.
1/2 HP, Thermoplastic Submersible Sewage Pump, Maximum Flow Rate Is 7,800 Gallons Per Hour, 6,420 GPH At 10' Of Discharge Lift, Reinforced, Corrosion Resistant, Combination 2" - 3" NPT Discharge Capable Of Handling Up To 2" Solids, Will Replace Most Sewage Pumps Without Any Plumbing Changes, Piggy Back Tether Float Switch For Automatic Or Manual Operation, Lower Ball Bearings For Quiet Operation, Cast Iron Seal Plate, Easy Access Handle For Portability.
1-1/4" - 1-1/2", Plastic Inline Sump Check Valve, Prevents Back Flow To Sump Pumps, Fits Both Pedestal & Submersible Sump Pumps With 1-1/4" Or 1-1/2" Discharge.
2", Plastic Inline Sewage Check Valve, Prevents Back Flow To Sump Or Sewage Pumps, Will Fit 2" Discharge Pipes, Prevents Backflow Of Water Into Sewage Basin Which Prevents Pump From Cycling On & Off Too Often.
1-1/2" Male Pipe Thread, Plastic Inline Sump Check Valve, Connects Directly Into Sump Pump Discharge, Constructed From Durable Thermoplastic Material, For Permanent Installation, 1-1/2" PVC Slip Coupler Can Be PVC Welded Directly To Check Valve, For Temporary Installation, Flexible Discharge Hose Can Be Clamped To The 1-1/4" Barbs.
1/4 HP, Portable Electric Water Removal Utility Pump, Pumps Up To 1,050 GPH At 0', Corrosion Resistant, Reinforced Thermoplastic Motor Housing, Volute & Impeller, Passes 1/8" Solids, 3/4" Bronze Discharge Adapter Connects To Standard Hose, Top Center 3/4" Discharge Design Provides Balanced Installation, Assembled In The Us With Foreign & Domestic Parts.
1-1/2" Male Pipe Thread, Plastic Inline Sump Check Valve, With 1-1/4" x 1-1/2" Boot With Flexible Connector On The Discharge Side, Fits 1-1/2" Pump Discharge Threads, Constructed From Durable Thermoplastic Material, Connects Directly Into Sump Pump Discharge.
14 Gallon Capacity, Free Standing, Pressure Pump Tank, 100 PSI Working Pressure, 38 PSI Pre-Charged Well System, Lightweight Drawn Steel Shell With Ultra UV High Gloss Exterior Powder Coat, Bacteria Resistant Parabolic Diaphragm Eliminates Rubbing On The Diaphragm Or The Tank Wall, Attached Directly To An Interior Powder Coated Wall, Galvanized Acceptance Fitting Provides A 100% Corrosion Resistant Water Reservoir & A Reliable Water Tight Seal, Meets FDA & NSF 61-372 Requirements For Potable Water Supply, Durable Composite Base Eliminates Corrosion & Rotates For Easy Plumbing Alignment, Usable Water Drawdown @ 30-50 PSI 4.3 US Gallons, 1" Female Pipe Thread Connection.